Update Galaxy Apollo GT-I5801 to Android 2.2 Froyo DDJP6 firmware

October 14, 2022

Update Galaxy Apollo GT-I5801 to Android 2.2 Froyo DDJP6 firmware. Today in our step-by-step guide we’ll be discussing some easy methods for upgrading the Samsung Galaxy Apollo i5801 smartphone to Android 2.2 I5801DDJP6 firmware update. Samsung launched Galaxy Apollo in June 2010 with low-end specs and features including 3.2 inches capacitive touchscreen with 240 x 400 pixels of resolution, internal memory of 512 MB with 256 MB of RAM, a 3.15-megapixel primary camera with functions like autofocus, geo-tagging, and smile detection.

Galaxy Apollo GT-I5801 Android 2.2 Froyo DDJP6 firmware

Also, it included connectivity features like Wi-Fi 802.11, hotspot, FM radio, and micro USB 2.0. It had a removable Li-Ion 1500 mAh battery which was capable of providing 15 hours of Talktime. Galaxy Apollo had in build Android 2.1 Eclair operating system which can be upgraded to Android 2.2 Froyo with our complete step-by-step instructions. Interested users who want to flash official Android 2.2 Froyo DDJP6 stock firmware on their Samsung Galaxy Apollo GT-I5801 smartphone, follow the step-wise instructions given below.

Firmware Info:

Model: GT-I5801
Model name: GALAXY Apollo
Country: India
Version: Android 2.2
Build date: Thursday, 23 June 2011
Product Code: INU
PDA: I5801DDJP6
CSC: I5801ODDJP6
PHONE: I5801DDJP2

Disclaimer:

This guide for flashing the official Android 2.2 Froyo DDJP6 firmware on Galaxy Apollo is quite risky. So ensure that you are carefully following all the instructions mentioned below. Do not implement anything on your own as doing so will increase the chances of bricking your Galaxy Apollo device. We at droidthunder.com will not be held responsible in case if you brick your Galaxy Apollo by following these steps.

This Official Android 2.2 Froyo DDJP6 firmware update must be flashed only on Samsung Galaxy Apollo with the model number GT-I5801. Flashing this firmware update on any other device or variant may result in unwanted outcomes or bricked devices. Hence, confirm your device model number from Homescreen–> Menu–>Settings –> About Phone before proceeding further.

Screenshots:

Galaxy Apollo GT-I5801 Android 2.2 Froyo DDJP6 firmware screenshot 1

Pre-Requisites:

  • Lack of battery power can increase the chances of interruption during the flashing process. So ensure that your Galaxy Apollo is charged at least up to 60%.
  • It is highly recommended to back up all your important phone data and settings including your contacts, apps, messages, call logs, memos and APN settings etc. before moving ahead.
  • Ensure that you have installed mobile-specific drivers on your computer to detect the device when you connect it to your computer. You can install them from the Samsung Kies CD which you’ve got at the time of purchase or just manually install them from the link given below.
  1. Download the latest Samsung USB Drivers.
  • (Optional) Disable all the security tools as well as antivirus that are installed on your computer temporarily. They may increase the risk of interruption during the firmware installation process.

Procedure to install Android 2.2 Froyo DDJP6 firmware on Galaxy Apollo GT-I5801

Download files:

Odin3-v3.12.7

Android 2.2 Froyo DDJP6

Procedure:

Step 1: Firstly download and extract both of the above files to a convenient location on your computer.

Step 2: Then switch off your Galaxy Apollo completely.

Step 3: Now you need to boot your phone into downloading mode. For doing so, press and hold the ‘Home button + Power button + Volume down key’ simultaneously until you see a warning message. Leave all the keys now.

Galaxy Apollo GT-I5801 Android 2.2 Froyo DDJP6 firmware downloading mode screenshot 1

Step 4: Keeping the phone as it is, connect it to your computer using the micro USB cable. Now just press the Volume up button to continue. This will directly land your Galaxy Apollo into downloading mode. Refer to the screenshot.

Galaxy Apollo GT-I5801 Android 2.2 Froyo DDJP6 firmware downloading mode screenshot 2
Galaxy Apollo GT-I5801 Android 2.2 Froyo DDJP6 firmware downloading mode screenshot 3

Step 5: On the PC, launch the downloaded ‘Odin Multi Downloader3-v3.12.7′ software which you’ve just received after extraction. As soon as you open it, the ID: COM section located at the top left corner will turn light blue. Also, an Added message will appear in the message box window. This will confirm that your Galaxy Apollo has been successfully connected to your computer.

Galaxy Apollo GT-I5801 Android 2.2 Froyo DDJP6 firmware Odin screenshot 1

Note: If such a thing doesn’t happen then it’s more likely to be a problem with the mobile-specific drivers. So just confirm whether you’ve properly installed the mobile-specific drivers on your computer or not. You can install them via Samsung Kies or manually install them from the links given in the Pre-Requisites section. If the problem persists try changing the USB cable or the USB port.

Step 6: Then click on the Options tab present on the Odin window and tick the Auto Reboot and F.Reset Time options. Tick only these two options and leave all the other options as they are.

Galaxy Apollo GT-I5801 Android 2.2 Froyo DDJP6 firmware Odin screenshot 2

Note: Do not tick the Re-partition option as it may increase the risk of bricking your device.

Step 7: Now, click on the AP button on the Odin window and browse to the firmware package file which you’ve downloaded and select it.

Galaxy Apollo GT-I5801 Android 2.2 Froyo DDJP6 firmware Odin screenshot 3

Step 8: Then you need to initiate the flashing process. For that just press the Start button located on the Odin window.

Galaxy Apollo GT-I5801 Android 2.2 Froyo DDJP6 firmware Odin screenshot 4

Note: The device will automatically boot itself while the process goes on. Do not interrupt the flashing process by disconnecting the micro USB cable.

Step 9: Be patient and wait for the flashing process to get completed. As soon as it completes successfully, you’ll see that the ID: COM section on the Odin window is turned green with the message ‘Pass’ on it. On the other side, your Galaxy Apollo will automatically restart itself. This will confirm that the Official Android 2.2 Froyo DDJP6 firmware has been successfully installed on your Samsung Galaxy Apollo GT-I5801. Now you may safely disconnect your phone from the computer by removing the micro USB cable.

Galaxy Apollo GT-I5801 Android 2.2 Froyo DDJP6 firmware Odin screenshot 12

Note: If the process fails or if Odin gets stuck or in case your device gets into a boot loop, then close the Odin window, remove the battery from your Galaxy Apollo and re-insert it. Again go into downloading mode and follow the same procedure as given above.

Conclusion

Great work! The official Android 2.2 Froyo DDJP6 firmware has been successfully installed on your Samsung Galaxy Apollo GT-I5801 smartphone. To verify the same go-to Menu->Settings->About Phone. Don’t forget to share your experience after using this firmware update. Also if you face any kind of difficulty going through the process, do let me know through the comments section given below.

Recommended Articles
No data was found

Leave a Comment

You Might Like
Use QFIL Tool to flash Qualcomm firmware